#NO TIMETOOL ON PRIMOS CAMERA SERIAL#
#Primos hunting easy cam timetool app serial number#
#NO TIMETOOL ON PRIMOS CAMERA UPDATE#
UPDATE DIRECTIONS 2019 IMPULSE TRAIL CAMERA (Model number is shown on back of package and back of camera) If the first six characters in the model number are 119425, 119435, 119445 or 119455 you may need the update. Go to and navigate to the “2019 Impulse Trail Cams” within the “DOWNLOAD THE LATEST SOFTWARE” section page to download the update and save it to a formatted SD card.#Primos hunting easy cam timetool app download#
Insert an SD card into your computer and format it. Now copy the downloaded file onto your SD card. Power on the camera and Navigate to the Setup-Firmware Update screen.Insert the SD card containing the update into the camera.The file name should read IMPULSE-V1.3.42.bnl. Upon hitting the OK button the camera will ask you to confirm that it is updating to version 1.3.42. Once the camera has re-booted, the update is complete.Select Ok and the update will show that it is copying…. Navigate to Version Check and make sure that is says 1.3.42. If it does you can now setup the camera as normal. If it does not, please repeat steps 2 and 3. Please read the below instructions completely before starting. A green LED (on the front of the camera) will begin flashing and you can release the ▲ button.While holding the ▲ button, slide the power switch to SETUP.With the camera turned OFF, put the SD card and 8 fresh batteries into the camera.Safely remove/eject the SD card from the computer once the files have been copied.Copy the “.BRN” and “.ena” files to an empty SD card.If any files exist on the SD card, it is recommended to back up the files and format the card Failure to follow the directions will result in a bricked camera that will no longer operate and is irreversible. When the Green LED stops flashing, the update is complete.The green LED is located in the same location as the Red PIR indicating LED, which will flash as well when motion is detected.
#Primos hunting easy cam timetool app update# Turn the camera off, let sit for 5-10 seconds, and then turn back to setup.#Primos hunting easy cam timetool app download#.#Primos hunting easy cam timetool app software#.#Primos hunting easy cam timetool app update#.#Primos hunting easy cam timetool app serial number#.
0 kommentar(er)
